Products Fe Frequency Converter Rexroth Frequency Converter Fe represents the new, economical line of converters from Control City – the control technology capital. Its compact dimensions allow these standard converters to cover the entire power range, from 0.75 kW to 110 kW. With exceptional value, easy operation and a wide variety of standard functions, Frequency Converter Fe sets new standards in its class. Download Material: | Fe English Brochure (0.7 MB) | Fe English User Manual (9.8 MB) | PROFIBUS Manaul (0.1 MB) Benefits  Rated motor output from 0.75 kW to 110 kW  Linear V/f curve  Output frequency from 0 Hz to 650 Hz  Overload capacity: G-type: 2 x IN for 1 sec. / 1.5 x IN for 60 sec.; P-type: 1.2 x IN for 1 min. / 1.05 x IN for 60 min.  Functions  Power supply voltage: 3 AC 380 to 480 V (-15%/+10%)  Supply frequency: 50 to 60 Hz (+- 5%)  Rated motor voltage: 3-phase, 0 V to power supply voltage   Internal brake chopper: Standard brake chopper up to 15kW  Modulation type: Magnetic flux PWM modulation  Speed regulation range: 1:100  Start-up torque: Maximum start-up torque 150% at 5Hz  Frequency resolution: Digital, 0.01Hz; Analog, Maximum fequency x 0.1%  Ramps: Linear, S-curve  Direct-current brake: Start frequency 0 to 60Hz; Braking time 0 to 10 sec.  Automatic energy saving function: Load-dependent adaption of V/F characteristic curve  Automatic voltage regulation (AVR): Excessively high supply voltage is automatically reduced to rated motor voltage  Automatic PWM frequency adaption: Load-dependent adaption of PWM frequency  Integrated controller: Integrated PLC, operating Panel  Status messages via multi-function output signal: In/above/below frequency range, operation, etc.  Bus systems: ModBus, PROFIBUS (option)   Ambient conditions  Ambient temperature: -10 to +40℃ (output must be reduced from 40 to 50℃)  Max. installation height: To 1.000m w/o derating, max. 4.000m above sea level with reduced output of -20%  Relative humidity: <90%  Degrees of protection: IP20